Sprite Requests

ZyloWalsh · Post by **ZyloWalsh** » Fri Jul 17, 2015 1:07 am #104998

Bottom post of the previous page:

phil235 wrote: Thanks for the sprites!

I like the eject and cycle equipment (although only the one w/o number is needed since the amount of equipment on mech can vary from 0 to 6).
The air and light look good but I'm afraid just having the word "light" and "air" isn't sufficient to make it easily identifiable, it could use an image instead of a simple rectangle.
"View mode" is ambiguous. It should be "view stats" at least. Also, here again, I'd prefer a big image rather than just words. The action buttons are already pretty small so we don't want players to have to a long close look to distinguish the words on each button before clicking.

I like the colors, it will help players not confuse mech action buttons with the other ones.

Okay, here are all of the action buttons.

EDIT: Just realized I didn't include "smoke". It should be in the dmi now.

Not-Dorsidarf · Sun Jul 30, 2023 1:33 am

I think the base ninja suit (The one without the glowing green shit) actually looks pretty close to what you're after

Luke Cox · Post by **Luke Cox** » Thu Jul 30, 2015 2:56 am #108318

After several cult rounds where people wouldn't GET AROUND THE FUCKING NAR'SIE RUNE, I would like a custom sprite for the Summon Nar'sie rune. Black with a red glow would look best. Somebody in the minor suggestion threads showed interest in implementing it.

Gun Hog · Post by **Gun Hog** » Thu Jul 30, 2015 4:37 pm #108463

Luke Cox wrote:After several cult rounds where people wouldn't GET AROUND THE FUCKING NAR'SIE RUNE, I would like a custom sprite for the Summon Nar'sie rune. Black with a red glow would look best. Somebody in the minor suggestion threads showed interest in implementing it.

That would be me. Make it sexy and animated! I could probably give it a luminosity level to make it stand out even more.

ThanatosRa · Post by **ThanatosRa** » Thu Jul 30, 2015 8:36 pm #108504

How hard would a Fat Sprite project be right now?

Nienhaus · Post by **Nienhaus** » Thu Jul 30, 2015 8:38 pm #108506

ThanatosRa wrote:How hard would a Fat Sprite project be right now?

Quoting myself

Nienhaus wrote:
An0n3 wrote:Now bring bat fat sprites. Two great things that go great together (when forced on the participants).
Have fun getting a spriter for that.
I'll take payment.

ThanatosRa · Post by **ThanatosRa** » Thu Jul 30, 2015 8:40 pm #108507

Nienhaus wrote:
ThanatosRa wrote:How hard would a Fat Sprite project be right now?
Quoting myself
Nienhaus wrote:
An0n3 wrote:Now bring bat fat sprites. Two great things that go great together (when forced on the participants).
Have fun getting a spriter for that.
I'll take payment.

Oh I missed that.

That bad huh.

Nienhaus · Post by **Nienhaus** » Thu Jul 30, 2015 8:43 pm #108508

It's just take a while honestly.

Edit:Btw the cost would be like, a pizza.

ThanatosRa · Post by **ThanatosRa** » Fri Jul 31, 2015 9:01 pm #108720

>no money

shit.

AnonymousNow · Fri Sep 04, 2015 1:48 pm

I was one of those people who suggested stacked rod sprites, but I'm thinking that it may now be appropriate for other material stacks, if possible.

Either 1/1, 2/2, 3/3, 4/4, 5/5-50, or 1/1, 2/2, 3/3-50, please.

420weedscopes · Mon Sep 21, 2015 2:01 pm

oh no j_mads was talking about hydroponics sprites near me
the fever
the THIRST

Gun Hog · Post by **Gun Hog** » Tue Sep 22, 2015 2:04 pm #120399

I would like a sprite for a Science themed space suit which is also a bomb suit, for the RD. Very low priority, it is not likey to actually be implemented. But, you know, just in case.

Amnestik · Post by **Amnestik** » Sat Oct 03, 2015 6:22 pm #122878

New chapel pews would be nice

Or at least north/south angles for the old ones, as the 'altar' hasn't been oriented that way since about 2011

In fact: an altar, collection plate, holy water font, communion chalice, communion wafers, paten, all that shit would be pretty neat

tuypo1 · Post by **tuypo1** » Tue Oct 06, 2015 2:09 pm #123600

I would like to request a Maneki-neko spirit.
Prefrebly a model that works on springs that last for a few minutes before needing to be restarted but an electronic model or even just a static image without a moving arm would still be great. (In fact I can easily do enough to make the spring loaded action look right myself probably (with a constantly moving arm that is I lack the skills to animate an arm))

https://en.wikipedia.org/wiki/Maneki-neko

DaemonBomb · Post by **DaemonBomb** » Thu Oct 08, 2015 12:09 am #124156

Amnestik wrote:New chapel pews would be nice

Or at least north/south angles for the old ones, as the 'altar' hasn't been oriented that way since about 2011

In fact: an altar, collection plate, holy water font, communion chalice, communion wafers, paten, all that shit would be pretty neat

https://tgstation13.org/phpBB/viewtopic.php?f=11&t=4865

Bawhoppennn · Post by **Bawhoppennn** » Wed Oct 21, 2015 2:58 pm #128208

A few sprites I would like are

Bottled water.

Weird ancient alien tiki stone things of nondescript cultural origin (with maybe a purplish glowing version)

A syndicate engineer hardsuit, probably just a black and red streaked version of a normal engineering hardsuit.

A generic hardsuit, probably just grey and silver like the EVA suit colors.

A military hardsuit, dunno what it would look like.

Some small frog with a hopping sprite.

A swat helm variant that is just plain looking.

An AK-47.

A Laser AK-47.

Some sort of Russian Transport Chopper and a Helipad turf sprites (4x4 tiles) probably something like this:

Spoiler:

Military tactical goggles.

Some black keycard scanner with a red/green light and an off version of it.

A soviet and a pirate ID card, with a hammer and a sickle and skull and crossbones respectively.

A wooden crossbow.

A generic grey rock.

Alot to ask for but I have plans :^)

tuypo1 · Post by **tuypo1** » Fri Oct 23, 2015 5:10 am #128692

I think theres already a syndi engineering suit on the derelict

newfren · Post by **newfren** » Fri Oct 23, 2015 6:30 am #128710

tuypo1 wrote:I think theres already a syndi engineering suit on the derelict

It's a soft suit, not a hardsuit, and it borrows a lot more from the syndicate spacesuit than it does from engineering's hardsuits, which I think is what they wanted.

J_Madison · Post by **J_Madison** » Fri Oct 23, 2015 5:56 pm #128784

Sniper

Spoiler:

(D)MR

Spoiler:

PDW

Spoiler:

Three guns.
One sniper, name: C50-S. 5 bullets to a magazine. Bolt actions. (requires the rifle to be "cocked" twice; BOLT OPEN (empty bullet out) BOLT CLOSE, introduce loaded bullet to load a live bullet).
One marksman rifle: C42-MR. 10 bullets to a magazine.
One personal defense weapon: C15-PDW. 12 or 15 bullets to a magazine. (2 shot burst or 3 shot burst dependant on how many bullets the gun will have)

I need the following:
Bullet shell .338 and .338 used shells.
.338 bullet box.
.338 stripper clip loaded with 1, 2, 3, 4, and 5 bullets.
.338 stripper clip empty (0 bullets).
Sniper with (loaded magazine)

Marksman rifle loaded with magazine.
Marksman rifle unloaded/without magazine.
Marksman rifle magazine loaded.
Marksman rifle magazine empty.

Personal defense weapon loaded.
Personal defense weapon without magazine.
Personal defense weapon magazine loaded.
Personal defense weapon magazine empty.
Personal defense weapon with silencer.
Personal defense weapon without silencer.

DemonFiren · Post by **DemonFiren** » Fri Oct 23, 2015 6:44 pm #128791

Image tags, can you use them?

J_Madison · Post by **J_Madison** » Fri Oct 23, 2015 7:07 pm #128794

DemonFiren wrote:Image tags, can you use them?

Dimensions. The forum wouldn't let me use them, otherwise I'd use it.

Post by **Thunder11** » Sun Oct 25, 2015 3:54 pm #129364

Tue Oct 27, 2015 12:48 am

Requesting inhands for a chainsaw that overlaps with a human arm the same way the armblade does.
I made a shitty sprite myself but I'm not happy with it (it doesn't even cover the human's hand) and I don't want to make sprites for every single direction + both hands.

What it looks like on-mob:

Spoiler:

asskek · Post by **asskek** » Thu Oct 29, 2015 6:43 pm #130516

a mouse with a little pink bow if you would kindly

Fri Oct 30, 2015 11:48 pm

sprites that aren't codersprites for this PR
https://github.com/tgstation/-tg-station/pull/12741
basically all i need is a big-ass golden gangster necklace (preferably with a big $ sign), both a sprite for when it's on the floor and a sprite for when you're wearing it

Gun Hog · Post by **Gun Hog** » Thu Nov 05, 2015 5:07 pm #131906

I would like a blue version of the on-weapon flashlight sprites. I plan on allowing normal flashlights to attach to energy weapons.

Wyzack · Post by **Wyzack** » Thu Nov 05, 2015 5:21 pm #131911

Is our current revolver sprite one of SS13's sacred cows donut change evar? Revolvers in general are so awesome but our current revolver sprite looks like fucking garbage. Could someone make a better one?

Not-Dorsidarf · Sun Jul 30, 2023 1:33 am

Wyzack wrote:Is our current revolver sprite one of SS13's sacred cows donut change evar? Revolvers in general are so awesome but our current revolver sprite looks like fucking garbage. Could someone make a better one?

Matebas pretty good

Wyzack · Post by **Wyzack** » Fri Nov 06, 2015 11:31 pm #132210

Yeah the metabe looks amazing, would there be controversy if it replaced our current sprite?

Post by **MMMiracles** » Wed Nov 11, 2015 2:29 am #132965

I need a hole sprited, something that could look half-decent if layered over any tile. Something to just show depth for a tile that leads into pitch black.

It'd also be really nice if the tile can be smoothed so theres no real limit on how big the hole could look.

peoplearestrange · Wed Nov 18, 2015 1:22 pm

Can someone resprite the crono pack into a proton-pack (ghost-buster style)
Also a beige resprite of a jump suit would be awesome too.

Scones · Post by **Scones** » Thu Nov 19, 2015 1:01 am #134623

Wyzack wrote:Yeah the metabe looks amazing, would there be controversy if it replaced our current sprite?

Consider that a Mateba is not a conventional revolver, if it matters to you (Although I see no reason why it should, seeing as it is functionally identical in-game)

kazeespada · Post by **kazeespada** » Sun Dec 13, 2015 4:13 am #139968

I need hamster, dead hamster, dead hamster in a pool of blood, empty hamster wheel battery, hamster wheel battery with dead hamster, and hamster wheel battery with hamster wheel with hamster running(preferably animated)

RedMcCloud · Post by **RedMcCloud** » Sun Jan 10, 2016 10:09 am #145728

Webley-Fosberry autorevolver sprite as a new option for the det revolver

make it happen reddit

(reviving this thread btw)

John_Oxford · Post by **John_Oxford** » Sun Jan 10, 2016 7:41 pm #145765

J_Madison wrote:-snip-

The AW rifle you gave has a detachable box magazine, and isn't fed by a stripper clip.

I have this laying around if its what your looking for, however.

Mon Jan 11, 2016 12:15 am

John_Oxford wrote:
J_Madison wrote:-snip-
The AW rifle you gave has a detachable box magazine, and isn't fed by a stripper clip.

I have this laying around if its what your looking for, however.

as a concept this is pretty neat, BUT the gun looks like it's spurting semen at the end which is not kosher

John_Oxford · Post by **John_Oxford** » Mon Jan 11, 2016 9:10 pm #145970

i laughed a little to hard at that.

you got a point though, there's not much room for a muzzle flash, even if i moved the gun back to the edge of the tile. but i'll work on it

Wed Jan 13, 2016 12:23 am

have you tried transparency? stunbatons use a really light transparent glow in their "active" sprite and it looks really nice, might work for a flash effect.

Mon Jan 25, 2016 2:17 am

i need sprites for my new feature: https://github.com/tgstation/-tg-station/pull/14879
it should look like maybe some kind of little box with saws on it and stuff, i don't know

Buggy · Post by **Buggy** » Mon Jan 25, 2016 4:09 am #148741

Could anyone create some sprites for my Silencium PR: https://github.com/tgstation/-tg-station/pull/14870?

Silencium is the mime counterpart to Bananium. What it looks like is up to you, so long as its mime-ish, and keep in mind the theme is that its kinda transparent/invisible.

At minimum I really need the sheet/ore/tile/coin sprites for Silencium, and the part sprites for the Reticence. If you want to do Silencium walls and airlocks too that'd be fine, but otherwise I was just going to make them really transparent normal walls/airlocks.

francinum · Post by **francinum** » Tue Jan 26, 2016 5:07 am #149034

[00:04:57] <Chocobro> ask in the sprite requests thread and I'll hopefully remember tomorrow
At Their Behest.

420weedscopes · Tue Jan 26, 2016 6:25 pm

thanks bud

you'll have to align them yourself in dreammaker
white version

enjoy

Amnestik · Post by **Amnestik** » Sun Jan 31, 2016 5:03 pm #150303

The nuke currently looks a doggy dick so it'd be nice of someone to fix it or better yet make a better one

TechnoAlchemist · Tue Feb 02, 2016 10:32 pm

I liked the old one

DemonFiren · Post by **DemonFiren** » Tue Feb 02, 2016 10:48 pm #151159

TechnoAlchemist wrote:I liked the old one

This, to be honest, family.

Tue Feb 02, 2016 11:26 pm

TechnoAlchemist wrote:I liked the old one

same tbh
classic round green nuke best nuke

TechnoAlchemist · Tue Feb 02, 2016 11:29 pm

revertrevert

Amnestik · Post by **Amnestik** » Wed Feb 03, 2016 1:01 am #151196

that was going to be my original suggestion too, but i figured that because it even got changed a different one would be a good compromise

invisty · Post by **invisty** » Wed Feb 03, 2016 1:03 am #151197

I prefer the new one.

Overruled!

Post by **Thunder11** » Thu Feb 11, 2016 1:52 pm #153447

https://upload.wikimedia.org/wikipedia/ ... volver.jpg
Nagant revolver with and without suppressor

TechnoAlchemist · Thu Feb 11, 2016 5:55 pm

That just looks like a silver version of the syndicate revolver

Also - what sort of madman puts a silencer on a revolver