Sprite Requests

tuypo1 · Post by **tuypo1** » Fri Oct 23, 2015 5:10 am #128692

Bottom post of the previous page:

I think theres already a syndi engineering suit on the derelict

newfren · Post by **newfren** » Fri Oct 23, 2015 6:30 am #128710

tuypo1 wrote:I think theres already a syndi engineering suit on the derelict

It's a soft suit, not a hardsuit, and it borrows a lot more from the syndicate spacesuit than it does from engineering's hardsuits, which I think is what they wanted.

J_Madison · Post by **J_Madison** » Fri Oct 23, 2015 5:56 pm #128784

Sniper

Spoiler:

(D)MR

Spoiler:

PDW

Spoiler:

Three guns.
One sniper, name: C50-S. 5 bullets to a magazine. Bolt actions. (requires the rifle to be "cocked" twice; BOLT OPEN (empty bullet out) BOLT CLOSE, introduce loaded bullet to load a live bullet).
One marksman rifle: C42-MR. 10 bullets to a magazine.
One personal defense weapon: C15-PDW. 12 or 15 bullets to a magazine. (2 shot burst or 3 shot burst dependant on how many bullets the gun will have)

I need the following:
Bullet shell .338 and .338 used shells.
.338 bullet box.
.338 stripper clip loaded with 1, 2, 3, 4, and 5 bullets.
.338 stripper clip empty (0 bullets).
Sniper with (loaded magazine)

Marksman rifle loaded with magazine.
Marksman rifle unloaded/without magazine.
Marksman rifle magazine loaded.
Marksman rifle magazine empty.

Personal defense weapon loaded.
Personal defense weapon without magazine.
Personal defense weapon magazine loaded.
Personal defense weapon magazine empty.
Personal defense weapon with silencer.
Personal defense weapon without silencer.

DemonFiren · Post by **DemonFiren** » Fri Oct 23, 2015 6:44 pm #128791

Image tags, can you use them?

J_Madison · Post by **J_Madison** » Fri Oct 23, 2015 7:07 pm #128794

DemonFiren wrote:Image tags, can you use them?

Dimensions. The forum wouldn't let me use them, otherwise I'd use it.

Post by **Thunder11** » Sun Oct 25, 2015 3:54 pm #129364

Tue Oct 27, 2015 12:48 am

Requesting inhands for a chainsaw that overlaps with a human arm the same way the armblade does.
I made a shitty sprite myself but I'm not happy with it (it doesn't even cover the human's hand) and I don't want to make sprites for every single direction + both hands.

What it looks like on-mob:

Spoiler:

asskek · Post by **asskek** » Thu Oct 29, 2015 6:43 pm #130516

a mouse with a little pink bow if you would kindly

Fri Oct 30, 2015 11:48 pm

sprites that aren't codersprites for this PR
https://github.com/tgstation/-tg-station/pull/12741
basically all i need is a big-ass golden gangster necklace (preferably with a big $ sign), both a sprite for when it's on the floor and a sprite for when you're wearing it

Gun Hog · Post by **Gun Hog** » Thu Nov 05, 2015 5:07 pm #131906

I would like a blue version of the on-weapon flashlight sprites. I plan on allowing normal flashlights to attach to energy weapons.

Wyzack · Post by **Wyzack** » Thu Nov 05, 2015 5:21 pm #131911

Is our current revolver sprite one of SS13's sacred cows donut change evar? Revolvers in general are so awesome but our current revolver sprite looks like fucking garbage. Could someone make a better one?

Not-Dorsidarf · Sun Jul 30, 2023 1:33 am

Wyzack wrote:Is our current revolver sprite one of SS13's sacred cows donut change evar? Revolvers in general are so awesome but our current revolver sprite looks like fucking garbage. Could someone make a better one?

Matebas pretty good

Wyzack · Post by **Wyzack** » Fri Nov 06, 2015 11:31 pm #132210

Yeah the metabe looks amazing, would there be controversy if it replaced our current sprite?

Post by **MMMiracles** » Wed Nov 11, 2015 2:29 am #132965

I need a hole sprited, something that could look half-decent if layered over any tile. Something to just show depth for a tile that leads into pitch black.

It'd also be really nice if the tile can be smoothed so theres no real limit on how big the hole could look.

peoplearestrange · Wed Nov 18, 2015 1:22 pm

Can someone resprite the crono pack into a proton-pack (ghost-buster style)
Also a beige resprite of a jump suit would be awesome too.

Scones · Post by **Scones** » Thu Nov 19, 2015 1:01 am #134623

Wyzack wrote:Yeah the metabe looks amazing, would there be controversy if it replaced our current sprite?

Consider that a Mateba is not a conventional revolver, if it matters to you (Although I see no reason why it should, seeing as it is functionally identical in-game)

kazeespada · Post by **kazeespada** » Sun Dec 13, 2015 4:13 am #139968

I need hamster, dead hamster, dead hamster in a pool of blood, empty hamster wheel battery, hamster wheel battery with dead hamster, and hamster wheel battery with hamster wheel with hamster running(preferably animated)

RedMcCloud · Post by **RedMcCloud** » Sun Jan 10, 2016 10:09 am #145728

Webley-Fosberry autorevolver sprite as a new option for the det revolver

make it happen reddit

(reviving this thread btw)

John_Oxford · Post by **John_Oxford** » Sun Jan 10, 2016 7:41 pm #145765

J_Madison wrote:-snip-

The AW rifle you gave has a detachable box magazine, and isn't fed by a stripper clip.

I have this laying around if its what your looking for, however.

Mon Jan 11, 2016 12:15 am

John_Oxford wrote:
J_Madison wrote:-snip-
The AW rifle you gave has a detachable box magazine, and isn't fed by a stripper clip.

I have this laying around if its what your looking for, however.

as a concept this is pretty neat, BUT the gun looks like it's spurting semen at the end which is not kosher

John_Oxford · Post by **John_Oxford** » Mon Jan 11, 2016 9:10 pm #145970

i laughed a little to hard at that.

you got a point though, there's not much room for a muzzle flash, even if i moved the gun back to the edge of the tile. but i'll work on it

Wed Jan 13, 2016 12:23 am

have you tried transparency? stunbatons use a really light transparent glow in their "active" sprite and it looks really nice, might work for a flash effect.

Mon Jan 25, 2016 2:17 am

i need sprites for my new feature: https://github.com/tgstation/-tg-station/pull/14879
it should look like maybe some kind of little box with saws on it and stuff, i don't know

Buggy · Post by **Buggy** » Mon Jan 25, 2016 4:09 am #148741

Could anyone create some sprites for my Silencium PR: https://github.com/tgstation/-tg-station/pull/14870?

Silencium is the mime counterpart to Bananium. What it looks like is up to you, so long as its mime-ish, and keep in mind the theme is that its kinda transparent/invisible.

At minimum I really need the sheet/ore/tile/coin sprites for Silencium, and the part sprites for the Reticence. If you want to do Silencium walls and airlocks too that'd be fine, but otherwise I was just going to make them really transparent normal walls/airlocks.

francinum · Post by **francinum** » Tue Jan 26, 2016 5:07 am #149034

[00:04:57] <Chocobro> ask in the sprite requests thread and I'll hopefully remember tomorrow
At Their Behest.

420weedscopes · Tue Jan 26, 2016 6:25 pm

thanks bud

you'll have to align them yourself in dreammaker
white version

enjoy

Amnestik · Post by **Amnestik** » Sun Jan 31, 2016 5:03 pm #150303

The nuke currently looks a doggy dick so it'd be nice of someone to fix it or better yet make a better one

TechnoAlchemist · Tue Feb 02, 2016 10:32 pm

I liked the old one

DemonFiren · Post by **DemonFiren** » Tue Feb 02, 2016 10:48 pm #151159

TechnoAlchemist wrote:I liked the old one

This, to be honest, family.

Tue Feb 02, 2016 11:26 pm

TechnoAlchemist wrote:I liked the old one

same tbh
classic round green nuke best nuke

TechnoAlchemist · Tue Feb 02, 2016 11:29 pm

revertrevert

Amnestik · Post by **Amnestik** » Wed Feb 03, 2016 1:01 am #151196

that was going to be my original suggestion too, but i figured that because it even got changed a different one would be a good compromise

invisty · Post by **invisty** » Wed Feb 03, 2016 1:03 am #151197

I prefer the new one.

Overruled!

Post by **Thunder11** » Thu Feb 11, 2016 1:52 pm #153447

https://upload.wikimedia.org/wikipedia/ ... volver.jpg
Nagant revolver with and without suppressor

TechnoAlchemist · Thu Feb 11, 2016 5:55 pm

That just looks like a silver version of the syndicate revolver

Also - what sort of madman puts a silencer on a revolver

Post by **Thunder11** » Thu Feb 11, 2016 6:23 pm #153484

A russian

Post by **Thunder11** » Fri Feb 12, 2016 2:33 pm #153718

Also need the stechkin sprite modified to look more like this
http://gotavapen.se/gota/ryssar/pistoler/aps01.jpg
Suppressor variant not needed

Smoopadoop · Post by **Smoopadoop** » Sat Feb 13, 2016 11:43 am #153872

Can someone sprite my shitty oc's hairstyle, or something similar?
gotta get that authentic shitty oc playstyle, knowwhatimsayin
sorry shit quality

Spoiler:

oh no you can see that he's part ligger scum

420weedscopes · Sat Feb 13, 2016 7:40 pm

that's some pretty good art kid

Sun Feb 14, 2016 6:51 pm

I need some kinda sharpening block sprite for https://github.com/tgstation/-tg-station/pull/15519

it shouldn't be hard to do, it's basically just a colorful rectangle, like this:

Spoiler:

newfren · Post by **newfren** » Mon Feb 15, 2016 11:15 pm #154378

My computer has decided to not download anything anymore so I can't get paint.net to make this background transparent but here.

http://i.imgur.com/8Fn6S9W.png

Wed Feb 17, 2016 12:56 am

newfren wrote:My computer has decided to not download anything anymore so I can't get paint.net to make this background transparent but here.

http://i.imgur.com/8Fn6S9W.png

good shit thanks fam

Post by **lumipharon** » Wed Feb 17, 2016 5:12 am #154721

Anyone able to make north/south facing sprites for the crusher/recycler? Currently it only has 1 sprite (which can probably be flipped, but that still leaves north and south facing).

imblyings · Post by **imblyings** » Wed Feb 17, 2016 8:41 am #154751

i'm not entirely sure but I vaguely remember being asked to do exactly that when I was a young naive spriter easily tricked into doing unpleasant dirty things and someone thought it would be fun to make me do directionals for recycling equipment sprites which were shit and horrible

http://www.filedropper.com/recycling

I'm sure what you need is in the dmi somewhere

it's icon_states crusher00 crusher10 crusher01(animated states) and crusher11(animated states) that you want

Wed Feb 24, 2016 11:08 pm

i need a bola
google images says it would look something like this:

Spoiler:

note that this is something that is designed to be handheld and is smaller than it appears in the image

Cuboos · Post by **Cuboos** » Fri Feb 26, 2016 1:07 am #157261

PKPenguin321 wrote:i need a bola
google images says it would look something like this:
Spoiler:
note that this is something that is designed to be handheld and is smaller than it appears in the image

like this?

i figured the recipe would be metal sheet and wire or something.

Mon Feb 29, 2016 4:11 am

Cuboos wrote:snip

Oh, I didn't see this in time... The bola PR already went through with a different sprite, sorry if you spent time on this

Cuboos · Post by **Cuboos** » Mon Feb 29, 2016 6:01 am #158236

PKPenguin321 wrote:
Cuboos wrote:snip
Oh, I didn't see this in time... The bola PR already went through with a different sprite, sorry if you spent time on this

Gun Hog · Post by **Gun Hog** » Thu Mar 03, 2016 12:59 am #158975

You can still update the sprite...

Post by **Atlanta-Ned** » Thu Mar 03, 2016 5:16 pm #159132

Can we get a new set of colored floor tiles for command? I sampled the color from a command door (#344E6D) and did a quick color replace in Photoshop. Presently, we're using medbay's lightblue color for tiles that represent command, but that (could be) confusing.

Before:

After:

Luke Cox · Post by **Luke Cox** » Tue Mar 22, 2016 10:34 pm #163766

I need a sprite for my suggested peacekeeper borg: https://tgstation13.org/phpBB/viewtopic ... ead#unread

Something with no edges or corners, lots of curves and round shapes. Parts of it should be padded. Soft pink/blue would work best since they're calming colors. Ideally, it should look like a law 1 zealot incarnate. It's supposed to be slightly ridiculous, so don't be afraid to have some fun with it.